|
SUN FIRM MACHINERY IND. CO., LTD.
|
|
CST-42120
1. The Ergonomic operation panel is easy to learn and to operate of Human-machine interface, with its 10.4 "LCD clear affinity" screen is concise, dialogue with window system, expert system, and processing database system, it achieves humanization and the purpose of Human Factors Engineering."
2. Through the intelligent self-diagnosis ability of controller analysis, with remote monitoring capabilities and technology, and analysis of the situation of using each machine. In addition, using the Internet to send messages to the computer or mobile phone to improve work efficiency and convenience. It accords with the industry 4.0- the demand of intelligent manufacture.
3. With Circuit system and re-boot, the electromagnetic switch can automactically return back to the original place. When the external current is anomalous, it will be quickly cut off to avoid damage to electrical equipment and any injuries. When re-booting, the electromagnetic switch will automactically reset to reduce waiting time due to shutdown.
4. The management of device system can display the life of the consumables on the controller , which can be prepared the consumables in advance to reduce the waiting time.
|
|
Model: SGT-5160
Features
1. The lathe of great effort is made to research and design by experience adopting the features of modern high power engine lathe and face lathe so that difficulty of finishing large of precision work piece in general machine shop will be easily solved. The lathe bed is made of high-strength cast iron FC 25.
2. The bed with high tensile structure for heavy cutting feature. The chassis of bed casts box-shaped and to be foot cutting plate.
3. Diameter of the spindle is large and installed on “three points support” with three roller bearings for the purposes of heavy duty and precision cutting.
4. All gears and shafts are made of Ni-Cr-Mo steel and carbonize and ground.
5. The speeds of spindle have 12 steps and designed on theoretical base.
6. The face plate and claw fit accuracy, rigid structure; it can clamp the work piece handily. There are thread cutting, longitudinal-cross moving, auto cutting etc., make for control of the feed gear box.
7. The carriage base is high tensile structure for heavy load cutting. The apron fits the motor machine. It is carry the carriage be made of longitudinal and cross rapid moving.
8. The electrical equipment uses electromagnetic contacter and overload protective device to ensure safety.
9. The Feed Rod equipped with safety device for overload to prevent from the damage of this machine.
10. The tailstock are steady heavy load and easily to clamp.
|
|
CHT-64240
1. The Ergonomic operation panel is easy to learn and to operate of Human-machine interface, with its 10.4 "LCD clear affinity" screen is concise, dialogue with window system, expert system, and processing database system, it achieves humanization and the purpose of Human Factors Engineering."
2. Through the intelligent self-diagnosis ability of controller analysis, with remote monitoring capabilities and technology, and analysis of the situation of using each machine. In addition, using the Internet to send messages to the computer or mobile phone to improve work efficiency and convenience. It accords with the industry 4.0- the demand of intelligent manufacture.
3. With Circuit system and re-boot, the electromagnetic switch can automactically return back to the original place. When the external current is anomalous, it will be quickly cut off to avoid damage to electrical equipment and any injuries. When re-booting, the electromagnetic switch will automactically reset to reduce waiting time due to shutdown.
4. The management of device system can display the life of the consumables on the controller , which can be prepared the consumables in advance to reduce the waiting time.
|
|
|
SUN FIRM MACHINERY IND. CO., LTD.
Tel: 886-4-24913781
Email: charles@sunfirm.com
Website：http://www.sunfirm.com
|
|
|
