iHP series
Configurable Intelligent High Power System
Designed for a wide range of medical and industrial applications, Artesyn’s iHP configurable intelligent power system provides accuracy, resolution and stability as either a programmable voltage or current source. It provides up to 24 kW in 3 kW increments and can be configured for up to eight (8) outputs using a wide variety of plug-in modules that address a large range of voltages and currents.
Safety approvals secured by Artesyn eliminate the need for an isolation transformer in medical equipment. The iHP power system also has industrial safety approvals and meets the SEMI F47 voltage sag tolerance standard for semiconductor processing equipment.
The iHP power system offers developers either an analog or digital interface to their system supporting standard communications protocols, while a software graphical user interface (GUI) allows for easy configuration.
|
uMP16 series
Configurable Power Supply
With a new higher maximum power output of 1800 watts, the µMP16 offers a power density of 22.9 W/in3 and efficiency of up to 91 percent, making it even more cost effective for equipment that has multiple power input requirements. The power supply case features six slots that users can configure from a wide variety of adjustable power modules, ranging from 0.9 to 60 Volts, enabling nearly limitless output power configurations across up to 12 outputs. With modules connected in series the µMP16 can achieve output voltages up to 360 Vdc.
Designed to ensure high efficiency and reliability – even in extreme environmental conditions – the new µMP16 is rated for performance at temperatures from -40 to 70 degrees Celsius. It can withstand a shock of more than 50 G and meets the MIL-STD-810G specification for vibration. The calculated mean time between failures is more than 350,000 hours at full load. Conformal coating is also available as an option.
The power supply is fully approved to the third edition of the EN60601-1 and UL ES60601-1 medical safety standards and with 2X Means of Patient Protection (MOPP), it can be used in non-patient contact and non-patient critical equipment.
|
LGA80D Highest Current Density Rated Non-isolated DC/DC Module
The LGA80D DC-DC module offers one of the highest current density ratings in the industry and market-leading efficiency of 95.5 percent typical. With a footprint of just 1 x 0.5 inches or 25.4 x 12.5mm, this innovative non-isolated unit offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. Design engineers can also generate higher current rated rails by connecting up to 4 units in parallel so that up to 320 amps can be supplied as a single power rail.
Both analog control and digital control functions are enabled on this unit, so the LGA80D can be controlled with resistors or controlled and monitored by using the industry-standard PMBus digital interface. Applications such as graphics, data or video processing, using high power devices, such as server processors, FPGAs, supercomputers, network, storage and telecom equipment, can benefit from the current density, efficiency and flexibility of control of Artesyn’s LGA80D digital DC-DC converter.
The input voltage and output voltage specifications remain the same in any configuration, so the input is defined as 7.5 V to 14 V and the output voltage can always be adjusted within the range of 0.6 V to 5.2 V meaning that a broad range of semiconductor devices and applications can be supported.
|
